The Unger HydroPower® Ultra 3 stage DI-only professional window cleaning system is the easiest and most efficient system on the market, setting the standard in deionizing technology for Pure Water cleaning. This is the fastest, safest, and most efficient way to clean outdoor glass surfaces, leaving a spot-free finish. Make sure you are changing out the resin bags and checking your working TDS when cleaning to maintain system effectiveness.

RESIN BAGS: 3-Stage


The Unger system is very easy to use and maintain. The DI resin bags are very easy to change. Just pull out the old one, drop in the new one, and make sure the bag is fully seated in the canister before putting on the lid. There’s almost maintenance needed for this system, and it will be fine during longer periods of disuse. Just drain out the water if you’re worried about a freeze, but it won’t harm the DI resin.

The HydroPower® Ultra DI resin bags are specifically designed with the KeyLock system to ensure the proper installation and the best waterflow and DI resin life. The DI resin is a virgin resin for the high performance available.

It is not recommended to refill the bags or to use the system without the bags. The HydroPower® Ultra 3-stage system holds three bags at a time. The TOP BAG should have a green KeyLock ring on the top and a red one on the bottom. The other two bags have red rings on the top and bottom. You can purchase the replacement DI resin bags for the 3-stage system as a pack of three bags. Be sure to get the bags for the 3-stage system.

RESIN BAGS: 1-Stage


There is also an Unger HydroPower® Ultra 1-Stage DI-Only Pure Water System, this system holds one bag at a time. It should have a green KeyLock ring on the top and a red one on the bottom. You can purchase the replacement DI resin bags for the 1-stage system as either a single bag or a pack of three bags. Be sure to get the bags for the 1-stage system.

WATER FLOW:


The system is really great because it offers great water flow with very little maintenance. In most cases you are able to reach up to 40-feet, sometimes up to 50-feet without the assistance of a booster pump.

TDS LEVELS:


Make sure you are checking the local TDS readouts in the area. Be cautious of running the system with higher than average levels. Typically, the Unger 3-Stage HydroPower will yield you anywhere from 30-36 hours of working life at 100ppm before the resin bags would need to be changed. It is highly recommended you replace all 3 bags at the same time. If you are working with TDS (total dissolved solids) levels reading high, your working time would be significantly less. Vice versa, if your TDS level are low, the resin bags will last longer.

Check your TDS by your zip code here for a general ideas of the quality of water you are working with. You can find out quickly and easily with this convenient on site with a battery-operated Handheld TDS Meter Water Tester. Quickly check the TDS levels of tap water or filtered water with an LED-displayed 3-digit parts per million (ppm) number. If your TDS levels are high, you may want to look at a multi-stage system.

ABOUT UNGER HYDROPOWER:


The Unger HydroPower® Ultra DI-only system is a light-duty, low-maintenance system. It might be the ideal choice for cleaners who need a system that can:

• Filter LOW TDS (0 to 150)
• Clean MEDIUM-HIGH heights (up to 50+ feet)
• Handle LOW usage (occasionally to a couple times per week)

If you’re unsure about whether the Unger HydroPower® Ultra DI-only is the right system for you, email or call us and we can help you find the perfect Pure Water system for your needs.

Unger offers a 100% satisfaction guarantee against any manufacturer defects, and here at Detroit Sponge we honor that guarantee. We’ll work with you to return or replace any item that doesn’t meet your highest expectations. Shop all the top tools and brands for top window cleaning supplies on our website.

The post Tips To use and Maintain the Unger HydroPower Ultra 3-Stage DI-only Pure Water System appeared first on Detroit Sponge.

Continue reading...